| |
| General Laboratory Products - Motorless Magnetic Stirrers |
| |
The ‘WHIRLMATIC’ Family of Magnetic Stirrers with Single and
Multi points are aesthetically designed, compact, ultraflat stirring
systems. They are washable & hermitically sealed. The
conventional Stirrers use a magnet fixed to the shaft of a motor
for rotational force, whereas motorless stirrers use rotating
electromagnetic field. No moving parts, Hence maintenance free. |
| |
| Single Point Stirrer control unit
can accept 1, 2 or 3 platforms |
The ‘SINGLE POINT STIRRER’ with multiple
platforms. This model gives the flexibility of
expanding the single point stirrer upto 3 points
by using add on platforms. The controller is
common. The single speed regulator controls
all the three points. It also has a facility to select
low, medium, & high speed selection. Low,
bounce free stirring is especially desirable for
biological samples. You can order simple blind
controller or digital indicating controller.
|
|
|
| |
| Whirlmatic Mega |
 |
The ‘WHIRLMATIC MEGA’ is with a
single platform with multiple stirring points.
You can keep 6 large flasks of 1 Litre
(max - dia 125 mm) Or 15 small
vessels (max - dia 60 mm) |
|
| |
| SP - COMBI |
Single Point Stirrer with built in controller.
|
 |
|
| TH - 100 |
 |
This is microprocessor based, aesthetically
designed & compact controller to be used
with Whirlmatic Stirring Platforms, in place
of normal controller when heating & timer are
required. It also has user programmable
methods which can be stored and recalled
as & when required for specific application. |
|
| |
| Stirrer with Hot Water Bath |
When Heating with precise temp is
required Hot Water Bath can be used.
The Bath can be of acrylic material
(Max. temp 600C) or of Stainless Steel
(Max. temp 900C). For the temperature
controller there are two options.
|
| |
Option 1:
Simple digital controller can be used for
temp control, along with regular control
unit for the stirrer. This is economical
version & with this timer is not available. |
|
|
| |
Option 2:
When the application calls for
stirring at elevated temp you may
use microprocessor based controller
(TH -100) which has facility of
maintaining temp within ± 0.20C, timer
and stirrer speed indication/ control |
|
|
| |
| |
| |
|
